<p>Using just 9 fixed point calibration and 0.1mm accuracy, it’s difficult to get the bed calibrated.</p><p>If the nozzle gets blocked on the first layer, the extruder is overpowering and literally forces the carriage to deflect (which also moves the print head).</p><p>Please turn down the max current on the extruder. Can we set this using G-code? I haven’t tried yet.</p><p>The extruder really needs to skip steps, instead of blindly overpowering the problem.</p><p> </p><p>Here’s video showing problem </p><p>https://lionoxmaneagle.tumblr.com/post/176144771359</p>