the part Extruder PCB Cover.STL doesn't fit to my Cetus3D MKII Standard. the part on my pronter has no sopport for the filament.
whre can i find the 'newest' extruder pcb cover?
As many people have already asked, could you provide the MK II extruder parts as stl files? I know that only one of them is 3d printed, but getting even the one would be nice.
I have the STL file you need, write me to amancad@hotmail.com
Regards
Amaury Cadena
Hi @JasonWu
I wanted to make a modified version of the Z-Axis Endstop Holder Standard but I found that the file is incorrect. Where can I find the correct part ?
Also, do you have OpenSCAD files ?
Thanks
To the folks looking for the extruder feeder guide STL, I’ve printed a replacement designed by Giovanni_. Thigiverse download page is here. You’ll need an M3 10mm screw, an M3 15mm screw, and a 683ZZ bearing. Works like a charm.
<p>Jason, are there additional models you can share? For instance, the printed parts that the filament passes through (the feeding).</p>
<p>@jasonwu I tried the extruder PCB cover. It was very attractive because I’ve been having feeding issues due to wear and tear on the feeder guide. It fit pefectly, but the filament guide portion of the model is way off. I’d say that the center of the filament needs to run through right where the outter most point of the guide is. I tried to illustrate it over the STL file. Unfortunately I have no idea where to begin modifying this as an STL file in Fusion360. Could you provide a more accurate up-to-date model?</p><p> </p><p> 
</p>
<p>@addohm</p><p>I think that our problem are relative </p>
<p>@rcmz I fixed this particular problem with re-designing it 
</p><p> </p><p>https://www.thingiverse.com/thing:2847390</p>
<p>My link isn’t broken. These forums are. lol</p><p> </p><p> </p><p>https://www.thingiverse.com/thing:2847390</p>
Dear Cetus Team / Tiertime,
Can I have the latest Z-holder Friction Cup.STL file?
I have Cetus 3D Printer Extended MKII.
I would like to print in black the 3D printed parts but the Z-holder file is different than the existing 3D printer part.
Many Thanks
<p>Hello!</p><p>Could you provide the printable parts for the Cetus3D MK3? Or are they the same as the other two versions?</p><p>Thank you!</p>
<p>Please remove/replace the feeder pcb cover from the MK2 standard zip.<br />The filament support tube does not align with feeder.</p><p>Thanks a lot</p>
<p>Please remove/replace the feeder pcb cover from the MK2 standard zip.</p><p>The filament support tube does not align with feeder.</p><p>Thanks a lot</p>
The links to the zip files seem to be broken. Can you please fix or reupload files? Thanks
Hello, the links are fixed.
Links for MK2 standard and extended are still broken
1 Like